STANDARD FEATURES

• ¼” Plate bottom, front, back, and sides.
• ¼” Tread plate top deck
• 3/16” baffles every 24”
• 6”x 4”x ¼” tubing heat tubes/frame work runs the inside length of the body.
• 7” Wheel well cut outs provide a lower deck height.
• Heavy duty bulkhead located at the front of the pipe storage deck.
• (2) 2” vents located at the front of the body.
• Water level gauge located in the center rear of the tank with a protective cover.
• (3) Access ladders. One each side at the front of the body and one at the rear of the tank.
• Interior of the water tank coated with F.D.A. approved 2-part epoxy paint.
• Exterior of the body sandblasted, primed, and painted one single color with a poly- urethane enamel paint.
• Water tank is mounted with our four point flex mounting system with a ¾” rubber cushion between the truck frame and tank bottom.
• Mud flaps with anti-sail brackets mounted in front and in rear of the drive axles.
• Completed body mounted on the customer’s chassis.

SIDE, CENTER AND BINDER WINCHES

• (10) 1.5”x3” Steel tubing stakes 16” tall with a 3/8”x2” chain-rub rail the length of the body on both sides. (5 stakes each side)
• (4) Removable 2” heavy-wall pipe center stakes 16” tall to divide the deck load.
• (3) DOT approved recessed binder winches located on the passenger side. (3) 4” straps and a binder bar are included.

DRAINS AND FILLS

• (3) 2” drains with brass ball valves (1) in each front corner and (1) in the center rear. The rear drain has a sump system allowing water to drain from both sides of the tank.
• (1) 2” fill with cam-lock cap located in the driver side front corner.

VERTICAL BOXES

• (1) Driver’s side front vertical tool cabinet measuring 64” tall x24” wide x24” deep outfitted with adjustable shelves.
• (1) Passenger’s side front vertical tool cabinet measuring 64” tall x24” wide x24” deep outfitted with adjustable shelves above the fuel pump, and the fuel hose reel.
• Both front vertical tool cabinets have LED food lights mounted on top of them

UNDER TANK TOOL BOXES

• (2) Heavy-duty flush bottom under tank tool boxes with hinge down doors constructed out of 1/8” steel on both sides in front of the drive axles. 18” tall x 22” deep with the length being determined by the location of the rear axles.
• (2) Heavy-duty flush bottom under tank tool boxes with hinge down doors constructed out of 1/8” steel on both sides in the rear of the drive axles. 18” tall x 22” deep with the length being determined by the location of the rear axles.
• Tool boxes are painted white inside with the body color on the outside.

FUEL TANK FEATURES

• (2) 110 gallon diesel fuel tanks located between the vertical tool cabinets with 2” vented fill caps.
• Fuel is supplied by a 12v fuel pump, thru a ¾” 50 ft. fuel hose with nozzle mounted on a manual return hose reel.
• Fuel pump and hose reel are located in the Passenger side vertical cabinet.

REAR BUMPER

• Rose-Wall heavy-duty rear step bumper complete with L.E.D. lights, 15 ton pintle hitch, and a 7-way RV style plug.
• The bumper is directly mounted to the frame of the truck preventing any stress from towing to the water tank.

Quote Form

Interested in a quote? Makes sure to fill out the form below to receive a personal quote

Water Truck Quote Form